|
Log in to post
|
Print Thread |
|
|
|
|
|
Off-Topic
|
Joined: May 2008
Posts: 5,085
Veteran
|
OP
Veteran
Joined: May 2008
Posts: 5,085 |
I was reading an article where someone suggested chopping up the lead vocal track into parts - example: verse 1, chorus, verse 2, bridge, etc. Then putting each part on a new separate track where that part can be processed individually. Reason being for more control over the dynamics if there's a soft verse and loud chorus or bridge. And for addressing things for example like if the chorus goes high and is more nasally than the rest, etc; that part can be processed differently.
I haven't tried this because in my case I think it might add too much cpu load. Is it a good idea? Anyone tried it?
Thoughts?
Last edited by Sundance; 11/04/10 07:35 PM.
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Sep 2003
Posts: 8,333
Veteran
|
|
Veteran
Joined: Sep 2003
Posts: 8,333 |
All of what you are talking about doing can be done by selecting a section and processing only that.
I do suggest however that multiple takes, and saving them without processing and then making careful notes about what you did to each segment are a great help with your finished product.
Most of my experience in that type of project came with making training videos with DVD's where we would do questions and and later answers, narratives, and commentary. All of it had to sound seamless, although sometimes it took 8 or 10 takes to get the right answer from someone when a pro asking the question needed only one take.
As to volume levels and the final cut it was always cut and pasted into one track after processing, the whole thing was balanced using headphones, monitors, and finally a test cut on DVD on the actual tv set to ensure everything was right. Very specific notes, workflow, incrementally saved work, and careful attention to detail ensured the final product was spot on.
Others might want to extol the use of normalizing a track at the end. I now appreciate that process more than ever, now that most of my upper end hearing has vaporized. I listened to a CD the other day in my car and I couldn't hear the soft parts at all, but the loud parts were too loud. (I have to turn off the hearing aids in the car, it's cold here and the fan noise is in the frequency I need boosted and it's terribly loud, so I can't hear much with them turned on.)
You might want to try using Audacity and singing and playing multiple tracks into it. Then mess with fade in, fade out, and see how it works, then boost volumes, try compression, eq etc. If you make the thing fun and short it's a great learning tool. I don't see how it would hurt processing times, the only time a track is processed is if you highlight a section and apply an effect to it, or if you render the final result. Another thing you can try is to take your short row row row the boat, and copy it, past to another track and shift it just a bit thickening your voice. Panning left and right.
I think Mac has some stuff on a website he can point you to, the whole 'sound' engineering thing is sort of a very technical thing to some, to others a 'black art', and there are many opinions on how to do almost any part of the process. It's probably like learning Russian. It's easy to say basic stuff, buy you can't read Dostoevsky without years of learning!
John Conley
Musica est vita
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Oct 2008
Posts: 19,933
Veteran
|
|
Veteran
Joined: Oct 2008
Posts: 19,933 |
Hi Josie,
I haven't thought of putting each section on it's own line. There's merit in that. I'm not sure that it would overload the cpu because technically, when (say) track 2 is playing the chorus, track 1 verse is empty in that region and thus has nothing on it to play. It would be different if tracks 1 and 2 were clones and volume envelopes were used to mute track 1 while track 2 played. In terms of cpu, both tracks would then be using the processor (it's just that one of them is too quiet to hear).
A couple of questions...
1. What are your computer specs and operating system?
2. What DAW do you use?
The reason that I ask is because I use Sonar as my final DAW and it allows me to use envelopes to control most of my plugins as well as my volume. This means that I can vary (for example) reverb between choruses and verses by using an envelope. This could potentially achieve the same effect that your describe by cutting tracks into sections.
Regards,
Noel
MY SONGS...Audiophile BIAB 2025
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: May 2000
Posts: 38,502
Veteran
|
|
Veteran
Joined: May 2000
Posts: 38,502 |
I would do that, but first I'd want to listen to the track and see if there are any sections that are significantly softer than others before going to all that trouble.
If it works, don't fix it.
--Mac
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Jan 2002
Posts: 7,913
Veteran
|
|
Veteran
Joined: Jan 2002
Posts: 7,913 |
Josie,
This is almost ALWAYS what I end up with - not by design necessarily, but because I usually do three takes of entire run-through of a song, and then I comp the lead vocal from sections of those 3 takes. Normally I collect those parts into one track and the main thing I'm doing is just slight adjustments on levels on the individual sections. However, with the DAW software that I use - I can process the 'clips' on a track individually by dragging and dropping effects onto those individual clips, in addition to having a 'rack' of effects to use on the collection of clips on the track. I don't do the individual processing often, unless there's a reason. Sometimes this can be useful to add some interest to the song in general. With this capability, it can keep the track count lower if that becomes an issue from a screen-size management issue. I like to have all tracks fit on one screen, no scrolling, while doing mixdown. Sometimes this is limiting, but normally not so.
-Scott
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: May 2000
Posts: 22,223
Veteran
|
|
Veteran
Joined: May 2000
Posts: 22,223 |
FWIW,
I work kind of like Scott. The assembled vocal ends up on one track.
I may hard write a gain change to a passage here, tune a passage there, or De-Ess a section by hard-writing it, but I don't end up with a single vocal part on multiple tracks *unless* I want to (for example) put a delay on one phrase for a certain effect or something that I don't want affecting the rest of the track.
I do not work here, but the benefits are still awesome
Make your sound your own!
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: May 2003
Posts: 8,021
Veteran
|
|
Veteran
Joined: May 2003
Posts: 8,021 |
I know this is how it's done BUT if you're going to sing live I'd try and do the vocal as one take otherwise this piece meal thing is going to be a crutch that'll hurt you in the end.
just my opinion.
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Mar 2007
Posts: 1,342
Expert
|
|
Expert
Joined: Mar 2007
Posts: 1,342 |
I use automation (programmed behavior for faders, effect parameters etc). Like Scott I start with a couple of dry takes on different tracks for each instrument and cut/paste one complete instrument (or vocal)track out of those. This way you end up with one drum-track, one bass-track etc. These tracks and if necessary the used effects are then automated.
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Aug 2006
Posts: 8,508
Veteran
|
|
Veteran
Joined: Aug 2006
Posts: 8,508 |
I do like so many above. I sing a lead vocal track three times and take the best psrts of each into a forth track. Maybe on verse 2 i miss a word, of do not like the phrasing i add in that line from a track i do like One i have a full track i delete the others , and listen to the complette track, then if anything is still bad i redo that part only.
HP Win 11 12 gig ram, Mac mini Sonoma with 16 gig of ram, BiaB 2025, Realband, Reaper 7, Harrison Mixbus 9 32c , Melodyne 5 editor, Presonus Audiobox 1818VSL, Presonus control app.
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: May 2008
Posts: 5,085
Veteran
|
|
OP
Veteran
Joined: May 2008
Posts: 5,085 |
Interesting responses.
I usually do several takes and then use the best one maybe swapping a word here or there with one of the other takes - the ability to edit that easily is still miraculous to me - but I keep my lead vox track on one track.
Noel, I'm just using Realband. I have an old trial version of Reaper I never figured out LOL. Sonar Le, Cubase Le, and Ableton came with my Emu but I deleted them
because Realband came along at the right time for me and it to grow together, it's the only DAW I have real experience using. grin. My computer is getting long in the tooth. It's a Compaq running XP. You've eased my mind about the cpu use should I ever actually try that idea.
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Jan 2002
Posts: 7,913
Veteran
|
|
Veteran
Joined: Jan 2002
Posts: 7,913 |
John,
Singing live is nearly all I do. That doesn't mean I'm perfect. My comps usually have only 5 or 6 parts to them; verses, chorus sections, etc.
It's not a crutch. It's a technique. Plus, if I want doubled vox down the road - I've already got the takes to work from. Much of my stuff is very light singing - breathy almost. Doubling is an easy way to give meat to the vocal without it being something other than sotto voce. I like how my voice sounds doubled when I sing quietly more than if it is not doubled.
It's as much of a crutch to do this in recording and mixdown, as amplifying an acoustic guitar for live performance.
-Scott
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Dec 2002
Posts: 1,199
Expert
|
|
Expert
Joined: Dec 2002
Posts: 1,199 |
Hi Josie,
About 10 years ago I had an occasion to go to a professional sound studio with a friend of mine to record a song that he wrote.
He was not a great singer and had to be egged on with lots of confidence comments.
Well the sound man just said to him that he was only getting the levels correct and could he just sing away.
The sound man was telling fibs (lies) because he was recording my friend as he was singing.It was his way of relaxing my friend.
He recorded about four or five takes of the song and then the magic happened.
He took each and every word (yes every word) and chose the best one for pitch and volume
(if, out of all the words in each track there was one that fitted better but the pitch was off, he would adjust the pitch)
He then rendered (placed all words that were scattered around onto one track) first saving the split file in case he needed it again.
He used a slapback echo on my friends voice that was very subtle and the joy on my friends face as he listened was a picture that is burned into my memory.
So Josie, if it's alright for a professional to do it, I'm sure for us to copy that isn't a bad thing.
Best regards
Michee
Windows 11 64 bit, Biab 2024 1111, Realband 2024
i7 Desktop Computer 16Gb Memory
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Feb 2010
Posts: 613
Journeyman
|
|
Journeyman
Joined: Feb 2010
Posts: 613 |
For some reason I've gotten to where I do use separate tracks for my verse & chorus, but not each one, I'll just have one for verses and one for chorus'. I do like the control it gives me on volume levels. But, now that I've started using Reaper for mixing and recording any live tracks, I'm not seeing the need as much since you can put splits / in any track and then have level, panning & fx controls over any of those splits in the track. (very cool)  Once you play with the program for awhile (OK, 20+ hrs in my case) and do a little referring to the manual, it's actually pretty user friendly and very stingy on CPU usage. Greg
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Feb 2010
Posts: 613
Journeyman
|
|
Journeyman
Joined: Feb 2010
Posts: 613 |
Quote:
John,
Singing live is nearly all I do. That doesn't mean I'm perfect. My comps usually have only 5 or 6 parts to them; verses, chorus sections, etc.
It's not a crutch. It's a technique. Plus, if I want doubled vox down the road - I've already got the takes to work from. Much of my stuff is very light singing - breathy almost. Doubling is an easy way to give meat to the vocal without it being something other than sotto voce. I like how my voice sounds doubled when I sing quietly more than if it is not doubled.
It's as much of a crutch to do this in recording and mixdown, as amplifying an acoustic guitar for live performance.
-Scott
I absolutely agree! 
Singing live is singing live and recording is recording. If I'm recording a song I want it to be the very best I can make it, and if that means punching in or piecing a part in to make it that way... so be it. Why re-do an entire part to fix a few problems? Isn't that why we now have all these cool digital tools! 
Greg
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: May 2000
Posts: 38,502
Veteran
|
|
Veteran
Joined: May 2000
Posts: 38,502 |
The practice of taking bits and pieces of multiple takes of the same track and piecing them together to make a single track that works throughout is known as "Compilation".
Or, in the vernacular of the Studio Engineer, "Comping".
I like to use Volume Envelopes for this task, turning all the other tracks down while at the same time turning the one track desired up. This avoids the tedious cut and pasting, pops and clicks when it doesn't cut right at zero crossing point, and perhaps best of all is nondestructive, you can always go back and change just one part of it to one of the other tracks if such is needed while building the mix.
Powertracks can do this via the Pianoroll feature, which has a dropdown for Audio Volume CC insertion with the mouse. I'd like to see it get changed someday such that we can draw the Volume Envelopes right overtop of the Waveform View as done in many other topnotch DAW programs.
--Mac
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Dec 2009
Posts: 378
Journeyman
|
|
Journeyman
Joined: Dec 2009
Posts: 378 |
My opinion is, it depends. The only songs I've had to go nuts over is top 40 stuff, where effects can change from part to part. And it's not just vocals either- it can be any instrument and snare is a big one too. But it's highly dependent on the song, arrangement, and the genera. Being able to automate effects on one track can cut down on having to split everything out too. Just splitting up vocals to multiple tracks won't stress your cpu persay, unless you already have your system up against the wall with lots of effects and tracks. It's not the extra vocal takes and tracks, it's the effects on those tracks that will eat up cpu. And that's why whenever possible, it's better to use effects as an aux rather than an insert. If you use a reverb on an aux buss you can send any number of tracks to it and then automate along the way how much will be sent or not for each track. This is better than having four vocal tracks with four separate reverbs on each track [inserts]. That sometimes is exactly what has to be done though, but when you can, use one reverb [or delay, etc] on an aux buss and send all the vocal tracks to it, each one being adjusted appropriately. It'll save tons of cpu power.
For years I recorded my vocals no less than four takes, comping one part together for the final. I've gotten away from that though. I mostly did it for a safety net with pitch. If I was pitchy on one phrase, well sure enough there was a good one between the other three. And maybe even a more inspired performance to mix and match from too. I do this by default when recording other singers. I get the great take done and then have them 'throw it away' a couple more times and see what happens. With the great take done and the pressure off, sometimes a really inspired performance can pop out. But for my vocals, I've let go of multiple takes. I've also let go of auto tune- a great tool that is VERY labor intensive to use properly. What I do is record one section of the tune and stop and listen carefully. If pitch and performance is good, I'll move on. If it's not, I'll punch the fixes or redo until it's right. When the vocal is done, I have one finished track that I no longer have to futz with in post. I don't have to comp or tune or anything. It's one track ready to be mixed. It cuts down BIG time on extra work. It's called getting it right on the way in, instead of noodling with endless desicions after the fact. It's liberating and frankly, it comes out much better. The key to doing that is the headphone mix. Next time you're doing vocal, put only a smidge of verb on it for inspiration and mute every instrument track that isn't absolutely necessary. What you'll get is a much better tuned vocal right off the bat and usually a much better performance too. After that, the business of splitting out tracks for multiple effects and comping and all is just different ways of mixing. No one way is right or wrong. It's comes down to what works at the time, and I find that the best way is usually the easiest and quickest way to get where you need to go.
So like I said....it depends!
Dan
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: May 2003
Posts: 8,021
Veteran
|
|
Veteran
Joined: May 2003
Posts: 8,021 |
Sorry but if you can't sing/play a simple 3or4 minute song end to end you shouldn't be presenting a CD as you.
I'm just an old guy that believes in practice over technology.
Yes I use technology in the form of RB but I do sing and play end to end.
I've also done a number of recordings for others on Bass and refuse to use punch-in.
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Sep 2003
Posts: 8,333
Veteran
|
|
Veteran
Joined: Sep 2003
Posts: 8,333 |
Whatever. Some of the worlds best live performers take months making takes for a CD and have almost no involvement in the process until they hear it near completion.
Some of the same people then do a 'live' DVD but the sound is mixed from multiple performances.
I do object to using the recording and then going live and lip-synching.
John Conley
Musica est vita
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Jul 2007
Posts: 996
Expert
|
|
Expert
Joined: Jul 2007
Posts: 996 |
John, Did you ever hear the interview Neil Tenant did for the BBC, when he described what it was like recording with Dusty Springfield?
He got the Pet Shop Boys track all set up, gave her the lyrics, adjusted all the monitors etc. Dusty sang the first word of the first line and promptly moved back from the mic. Devestated, Neil went to find out what was wrong, bad key? bad balance in the phones, hopeless song?...
Dusty said everything was fine, but that was just how she recorded - one word at a time!
Now if its good enough for Dusty....
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: May 2003
Posts: 8,021
Veteran
|
|
Veteran
Joined: May 2003
Posts: 8,021 |
Like I said it's my opinion & actually it's not really an opinion. Yes many "pros" do this I guess but they are in a different boat sometimes. Differing circumstances may dictate that they do this. To me ,at the level of experience of most of us here I surmise, I wouldn't be proud of something I had to piece meal together because i couldn't do it otherwise.What's the point in that?
|
|
|
|
|
|
|
|
|
|
|
|
Ask sales and support questions about Band-in-a-Box using natural language.
ChatPG's knowledge base includes the full Band-in-a-Box User Manual and sales information from the website.
|
|
|
|
|
|
|
|
|
|
|
XPro and Xtra Styles PAKs Special Extended Until August 31st!
XPro & Xtra Styles PAKs Special Extended Until August 31st!
The XPro Styles PAKs and Xtra Styles PAKs special offers are now available until August 31st at 11:59pm PDT!
Ready to take your Band-in-a-Box® 2025 experience to the next level? Now’s the perfect time! Expand your style library with XPro and Xtra Styles PAKs—packed with a wide variety of genres to inspire your next musical creation.
What are XPro Styles and Xtra Styles PAKs?
XPro Styles PAKs are styles that work with any version (Pro, MegaPAK, UltraPAK, UltraPAK+, or Audiophile Edition) of Band-in-a-Box® 2025 (or higher). XPro Styles PAKS 1-9 includes 900 styles!
Xtra Styles PAKs are styles that work with the UltraPAK, UltraPAK+, or Audiophile Edition of Band-in-a-Box® 2025 (or higher). With over 3,500 styles (and 35 MIDI styles) included in Xtra Styles PAKs 1-20, the possibilities are endless!
Get the XPro Styles PAKs 1 - 9 for only $29 ea (Reg. $49 ea), or get them all in the XPro Styles PAK Bundle for only $149 (reg. $299)! Listen to demos and order now! For Windows or for Mac.
Note: XPro Styles PAKs require Band-in-a-Box® 2025 or higher and are compatible with ANY package, including the Pro, MegaPAK, UltraPAK, UltraPAK+, and Audiophile Edition.
Get Xtra Styles PAKs 1 - 20 are on special for only $29 each (reg $49), or get all 19 PAKs for $199 (reg $399)! Listen to demos and order now! For Windows or for Mac.
Note: The Xtra Styles require the UltraPAK, UltraPAK+, or Audiophile Edition of Band-in-a-Box®. (Xtra Styles PAK 19 requires the 2025 or higher UltraPAK, UltraPAK+, or Audiophile Edition. They will not work with the Pro or MegaPAK version because they need the RealTracks from the UltraPAK, UltraPAK+, or Audiophile Edition.
Don’t miss this chance to supercharge your Band-in-a-Box setup—at a great price!
Mac 2025 Special Upgrade Offers Extended Until August 15th!
It's not too late to upgrade to Band-in-a-Box® 2025 for Mac® and save! We've extended our special until August 15, 2025!
We've added many major new features to Band-in-a-Box® 2025 for Mac®, including advanced AI tools like the amazing BB Stem Splitter and AI Lyrics Generator, as well as VST3 plugin support, and Equalize Temp. Plus, there’s a new one-stop MIDI Patches Picker with over 1,100 MIDI patches to choose from, all neatly categorized by GM numbers. The MultiPicker Library is enhanced with tabs for the SongPicker, MIDI Patch Picker, Chord Builder, AI Lyrics Generator, and Song Titles Browser, and the tabs are organized into logical groups. The Audiophile Edition is enhanced with FLAC files , which are 60% smaller than AIFF files while maintaining identical audio quality, and now ships on a fast 1TB SSD, and much more!
Check out all the new features in Band-in-a-Box® 2025 for Mac® here:
Purchase your Band-in-a-Box® 2025 for Mac during our special to save up to 50% off your upgrade purchase and receive a FREE BONUS PAK of amazing new Add-ons. These include the 2025 RealCombos Booster PAK, Look Ma! More MIDI 13: Country & Americana, Instrumental Studies Set 22: 2-Hand Piano Soloing - Rhythm Changes, MIDI SuperTracks Set 44: Jazz Piano, Artist Performance Set 17: Songs with Vocals 7, Playable RealTracks Set 4, RealDrums Stems Set 7: Jazz with Mike Clark, and more!
Upgrade to the 2025 49-PAK for just $49 and add 20 Bonus Unreleased RealTracks and 20 RealStyles, FLAC Files for the 20 Bonus Unreleased RealTracks, Look Ma! More MIDI 14: SynthMaster, MIDI SuperTracks Set 45: More SynthMaster, Artist Performance Set 18: Songs with Vocals 8, and RealDrums Stems Set 8: Pop, Funk & More with Jerry Roe.
Learn more about the Bonus PAKs!
New RealTracks Released with Band-in-a-Box 2025!
We’ve expanded the Band-in-a-Box® RealTracks library with 202 incredible new RealTracks (in sets 449-467) across Jazz, Blues, Funk, World, Pop, Rock, Country, Americana, and Praise & Worship—featuring your most requested styles!
Jazz, Blues & World (Sets 449–455):
These RealTracks includes “Soul Jazz” with Neil Swainson (bass), Mike Clark (drums), Charles Treadway (organ), Miles Black (piano), and Brent Mason (guitar). Enjoy “Requested ’60s” jazz, classic acoustic blues with Colin Linden, and more of our popular 2-handed piano soloing. Plus, a RealTracks first—Tango with bandoneon, recorded in Argentina!
Rock & Pop (Sets 456–461):
This collection includes Disco, slap bass ‘70s/‘80s pop, modern and ‘80s metal with Andy Wood, and a unique “Songwriter Potpourri” featuring Chinese folk instruments, piano, banjo, and more. You’ll also find a muted electric guitar style (a RealTracks first!) and “Producer Layered Guitar” styles for slick "produced" sound.
Country, Americana & Praise (Sets 462–467):
We’ve added new RealTracks across bro country, Americana, praise & worship, vintage country, and songwriter piano. Highlights include Brent Mason (electric guitar), Eddie Bayers (drums), Doug Jernigan (pedal steel), John Jarvis (piano), Glen Duncan (banjo, mandolin & fiddle), Mike Harrison (electric bass) and more—offering everything from modern sounds to heartfelt Americana styles
Check out all the 202 New RealTracks (in sets 456-467)
And, if you are looking for more, the 2025 49-PAK (for $49) includes an additional 20 RealTracks with exciting new sounds and genre-spanning styles. Enjoy RealTracks firsts like Chinese instruments (guzheng & dizi), the bandoneon in an authentic Argentine tango trio, and the classic “tic-tac” baritone guitar for vintage country.
You’ll also get slick ’80s metal guitar from Andy Wood, modern metal with guitarist Nico Santora, bass player Nick Schendzielos, and drummer Aaron Stechauner, more praise & worship, indie-folk, modern/bro country with Brent Mason, and “Songwriter Americana” with Johnny Hiland.
Plus, enjoy user-requested styles like Soul Jazz RealDrums, fast Celtic Strathspey guitar, and Chill Hop piano & drums!
The 2025 49-PAK is loaded with other great new add-ons as well. Learn more about the 2025 49-PAK!
Bonus PAKs for Band-in-a-Box 2025 for Mac!
With your version 2025 for Mac Pro, MegaPAK, UltraPAK, UltraPAK+, Audiophile Edition or PlusPAK purchase, we'll include a Bonus PAK full of great new Add-ons FREE! Or upgrade to the 2025 49-PAK for only $49 to receive even more NEW Add-ons including 20 additional RealTracks!
These PAKs are loaded with additional add-ons to supercharge your Band-in-a-Box®!
This Free Bonus PAK includes:
- The 2025 RealCombos Booster PAK:
-For Pro customers, this includes 33 new RealTracks and 65+ new RealStyles.
-For MegaPAK customers, this includes 29 new RealTracks and 45+ new RealStyles.
-For UltraPAK customers, this includes 20 new RealStyles.
- Look Ma! More MIDI 13: Country & Americana
- Instrumental Studies Set 22: 2-Hand Piano Soloing - Rhythm Changes
- MIDI SuperTracks Set 44: Jazz Piano
- Artist Performance Set 17: Songs with Vocals 7
- Playable RealTracks Set 4
- RealDrums Stems Set 7: Jazz with Mike Clark
- SynthMaster Sounds and Styles (with audio demos)
- 128 GM MIDI Patch Audio Demos.
Looking for more great add-ons, then upgrade to the 2025 49-PAK for just $49 and you'll get:
- 20 Bonus Unreleased RealTracks and RealDrums with 20 RealStyles,
- FLAC Files (lossless audio files) for the 20 Bonus Unreleased RealTracks and RealDrums
- Look Ma! More MIDI 14: SynthMaster,
- Instrumental Studies Set 23: More '80s Hard Rock Soloing,
- MIDI SuperTracks Set 45: More SynthMaster
- Artist Performance Set 18: Songs with Vocals 8
- RealDrums Stems Set 8: Pop, Funk & More with Jerry Roe
Learn more about the Bonus PAKs for Band-in-a-Box® 2025 for Mac®!
New! Xtra Styles PAK 20 for Band-in-a-Box 2025 and Higher for Mac!
Xtra Styles PAK 20 for Mac & Windows Band-in-a-Box version 2025 (and higher) is here with 200 brand new RealStyles!
We're excited to bring you our latest and greatest in the all new Xtra Styles PAK 20 for Band-in-a-Box! This fresh installment is packed with 200 all-new styles spanning the rock & pop, jazz, and country genres you've come to expect, as well as the exciting inclusion of electronic styles!
In this PAK you’ll discover: Minimalist Modern Funk, New Wave Synth Pop, Hard Bop Latin Groove, Gospel Country Shuffle, Cinematic Synthwave, '60s Motown, Funky Lo-Fi Bossa, Heavy 1980s Metal, Soft Muted 12-8 Folk, J-Pop Jazz Fusion, and many more!
All the Xtra Styles PAKs 1 - 20 are on special for only $29 each (reg $49), or get all 209 PAKs for $199 (reg $399)! Order now!
Learn more and listen to demos of the Xtra Styles PAK 20.
Video: Xtra Styles PAK 20 Overview & Styles Demos: Watch now!
Note: The Xtra Styles require the UltraPAK, UltraPAK+, or Audiophile Edition of Band-in-a-Box®. (Xtra Styles PAK 20 requires the 2025 or higher UltraPAK, UltraPAK+, or Audiophile Edition. They will not work with the Pro or MegaPAK version because they need the RealTracks from the UltraPAK, UltraPAK+, or Audiophile Edition.
New! XPro Styles PAK 9 for Band-in-a-Box 2025 and higher for Mac!
We've just released XPro Styles PAK 9 for Mac & Windows Band-in-a-Box version 2025 (and higher) with 100 brand new RealStyles, plus 29 RealTracks/RealDrums!
We've been hard at it to bring you the latest and greatest in this 9th installment of our popular XPro Styles PAK series! Included are 75 styles spanning the rock & pop, jazz, and country genres (25 styles each) that fans have come to expect, as well as 25 styles in this volume's wildcard genre: funk & R&B!
If you're itching to get a sneak peek at what's included in XPro Styles PAK 9, here is a small helping of what you can look forward to: Funky R&B Horns, Upbeat Celtic Rock, Jazz Fusion Salsa, Gentle Indie Folk, Cool '60s Soul, Funky '70s R&B, Smooth Jazz Hip Hop, Acoustic Rockabilly Swing, Funky Reggae Dub, Dreamy Retro Latin Jazz, Retro Soul-Rock Fusion, and much more!
Special Pricing! Until July 31, 2024, all the XPro Styles PAKs 1 - 9 are on sale for only $29 ea (Reg. $49 ea), or get them all in the XPro Styles PAK Bundle for only $149 (reg. $299)! Order now!
Learn more and listen to demos of XPro Styles PAKs.
Video: XPro Styles PAK 9 Overview & Styles Demos: Watch now!
XPro Styles PAKs require Band-in-a-Box® 2025 or higher and are compatible with ANY package, including the Pro, MegaPAK, UltraPAK, UltraPAK+, and Audiophile Edition.
New! Xtra Styles PAK 20 for Band-in-a-Box 2025 and Higher for Windows!
Xtra Styles PAK 20 for Windows & Mac Band-in-a-Box version 2025 (and higher) is here with 200 brand new RealStyles!
We're excited to bring you our latest and greatest in the all new Xtra Styles PAK 20 for Band-in-a-Box! This fresh installment is packed with 200 all-new styles spanning the rock & pop, jazz, and country genres you've come to expect, as well as the exciting inclusion of electronic styles!
In this PAK you’ll discover: Minimalist Modern Funk, New Wave Synth Pop, Hard Bop Latin Groove, Gospel Country Shuffle, Cinematic Synthwave, '60s Motown, Funky Lo-Fi Bossa, Heavy 1980s Metal, Soft Muted 12-8 Folk, J-Pop Jazz Fusion, and many more!
All the Xtra Styles PAKs 1 - 20 are on special for only $29 each (reg $49), or get all 209 PAKs for $199 (reg $399)! Order now!
Learn more and listen to demos of the Xtra Styles PAK 20.
Video: Xtra Styles PAK 20 Overview & Styles Demos: Watch now!
Note: The Xtra Styles require the UltraPAK, UltraPAK+, or Audiophile Edition of Band-in-a-Box®. (Xtra Styles PAK 20 requires the 2025 or higher UltraPAK, UltraPAK+, or Audiophile Edition. They will not work with the Pro or MegaPAK version because they need the RealTracks from the UltraPAK, UltraPAK+, or Audiophile Edition.
|
|
|
|
|
|
|
|
|
|
|
|
Forums58
Topics84,632
Posts782,059
Members39,710
| |
Most Online25,754
Jan 24th, 2025
|
|
|
|
|
|
|
|
|
Dansk
Deutsch - Windows
Español
Français - Windows
Italiano - Windows
Nederlands
Polski
Português
Svenskt
русский
Japanese
Simplified Chinese
Traditional Chinese
Korean