Log in to post
|
Print Thread |
|
|
|
|
Off-Topic
|
Joined: Jan 2002
Posts: 7,913
Veteran
|
Veteran
Joined: Jan 2002
Posts: 7,913 |
I am going to try one of the suction cup types and see how it works. Worst case I lose 12 bucks. Best case it works. My guess is that you will get wildly different results with this pup on the Dobro, simply because it's designed not to vibrate in just about everywhere except for the spider/cone. Can't put it on the cone directly as it will mass-load the cone to death - literally. Sides of the dobro body should be relatively dead as well from a vibration standpoint. You are going to be playing this live? If not, then mic the thing as pointed out above. SM57 should be fine, I would think.
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Jan 2002
Posts: 7,913
Veteran
|
Veteran
Joined: Jan 2002
Posts: 7,913 |
Eddie, Here's my friend Mike Auldridge stealing an extra Dobro break on "Out Among The Stars" with The Seldom Scene. http://youtu.be/JaojfdxYsK4He's getting great sound out of his Dobro with a Shure SM57 pointing at the approximate center of the spider and about 6 inches away. The vox mics are SM58s. Mike could afford any professional mic made yet he's using the SM57. Agreed that Dobro is cutting through the mix loud and clear. Reminds me I need to invest in a gooseneck mount to throw in the mic gig bag. So much easier to get a specific position for the mic than boom stands for something like this. Don, is that you leading?
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Dec 2003
Posts: 8,987
Veteran
|
Veteran
Joined: Dec 2003
Posts: 8,987 |
My friendship with Mike dates back to the 70s when we set oot to co-design the Mike Auldridge line of resonator guitars. He specified the design specifications and I would sub-contract the manufacturing off-shore though Kiso Suzuki, a major violin maker in Japan. The project was still born because the Japanese could not produce a spider/cone combination that met Mike's ear.
Mike won countless awards for his fantastic playing. His last work was as a QC for Beard Guitars and they make and sell the Mike Audridge Model in both 6 and 8 string.
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Dec 2003
Posts: 8,987
Veteran
|
Veteran
Joined: Dec 2003
Posts: 8,987 |
To give a wee glimpse into Mike's loving and generous personality, when I told him that Howard Tate (from these forums) was near death from cancer, Mike sent Howard a special Dobro piece that Howard treasured up to his death. What could be a more beautiful gift. Unfortunately, Mike died on December 29th, 2012 of the same loath disease, prostate cancer.
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: May 2000
Posts: 38,502
Veteran
|
Veteran
Joined: May 2000
Posts: 38,502 |
My guess is that you will get wildly different results with this pup on the Dobro, simply because it's designed not to vibrate in just about everywhere except for the spider/cone. Can't put it on the cone directly as it will mass-load the cone to death - literally. Sides of the dobro body should be relatively dead as well from a vibration standpoint.
Well a crazy experimenter like me would try cone attachment anyway. The amount of mass loading might be something that I could live with in order to amplify the thing, after all we're not talking a Dobro King here, we are talking the ability to do one Intro for one song. EQ in the amp would likely make up any difference there. And if I couldn't easily place it on the cone, then I'd try something like clamping one to the bridge, or even perhaps placing a sheet of that piezo plastic between bridge and cone somewhere. Heck, I'm crazy enough to try putting a miniature electret condenser element inside the Dobro, pointing at the cone. Attachment? A blob of RTV... --Mac
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Oct 2008
Posts: 8,074
Veteran
|
Veteran
Joined: Oct 2008
Posts: 8,074 |
I am going to try one of the suction cup types and see how it works. Worst case I lose 12 bucks. Best case it works. to me this sounds like the logical thing to try first. Very little monetary risk and reasonable potential to meet your needs. Please let us know how it works! ------update------ these can be found on ebay for even less
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Dec 2003
Posts: 8,987
Veteran
|
Veteran
Joined: Dec 2003
Posts: 8,987 |
Heck, I'm crazy enough to try putting a miniature electret condenser element inside the Dobro, pointing at the cone. Attachment? A blob of RTV... Mac, I did exactly that with my flattop, a Japanese Hummingbird copy. If memory serves, I think a Dobro has a sound post dead center of the cone. I suspect that would be the ideal place to mic the Dobie. I used the Panasonic WM063T electret mic element and hot-glued it in place. BTW, that's the same element that Greg Mackie used in his Spectrum Analyzer. (How would I know that?)
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Jan 2002
Posts: 7,913
Veteran
|
Veteran
Joined: Jan 2002
Posts: 7,913 |
My guess is that you will get wildly different results with this pup on the Dobro, simply because it's designed not to vibrate in just about everywhere except for the spider/cone. Can't put it on the cone directly as it will mass-load the cone to death - literally. Sides of the dobro body should be relatively dead as well from a vibration standpoint.
Well a crazy experimenter like me would try cone attachment anyway. The amount of mass loading might be something that I could live with in order to amplify the thing, after all we're not talking a Dobro King here, we are talking the ability to do one Intro for one song. EQ in the amp would likely make up any difference there. And if I couldn't easily place it on the cone, then I'd try something like clamping one to the bridge, or even perhaps placing a sheet of that piezo plastic between bridge and cone somewhere. Heck, I'm crazy enough to try putting a miniature electret condenser element inside the Dobro, pointing at the cone. Attachment? A blob of RTV... --Mac Mac, I have done this on my Larrivée acoustic with one of those AT 'choir' mics that also came with a spring clip for lavalier-type use. My issue was that at the time I had no way to roll-off the lows that were overwhelming the mic in the sound-hole. Those little ATs were some of the most versatile mics (they still make many flavors of them) mainly because of the various mounts that came with them (spring-wire for hanging over a choir, plastic tube with threaded mount for use on a stand, and the lavalier clip for all kinds of sneaky uses! My concern on mounting it right on the cone is that the mass is likely as much or more than the cone itself - but yes - experimentation would be fun! Eddie, as I think about the past use of the little AT condensers, if you have one of those (not unlike this: http://www.sweetwater.com/store/detail/Pro45 ) that also has a spring clip to use as a lavalier, there are plenty of places on a Dobro to clip one of these. You will likely need to significantly roll off the low end - I would do this as early in the analog signal chain as possible. Anyways, there are a few manufacturers of these types of mics, most of them terminate in a belt-pack connector rather than XLR.
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Jun 2003
Posts: 1,103
Expert
|
Expert
Joined: Jun 2003
Posts: 1,103 |
Every professional resonator guitarist I have ever played with used a Carl McIntyre Pickup.
Keith 2024 Audiophile Windows 11 AMD RYZEN THREADRIPPER 3960X 4.5GHZ 128 GB RAM 2 Nvidia RTX 3090s, Vegas,Acid,SoundForge,Izotope Production,Melodyne Studio,Cakewalk,Raven Mti
|
|
|
|
|
|
|
|
|
|
|
|
Ask sales and support questions about Band-in-a-Box using natural language.
ChatPG's knowledge base includes the full Band-in-a-Box User Manual and sales information from the website.
|
|
|
|
|
|
|
|
|
|
|
New! XPro Styles PAK 7 for Band-in-a-Box 2024 for Mac!
We've just released XPro Styles PAK 7 with 100 brand new RealStyles, plus 50 RealTracks and RealDrums that are sure to delight!
With XPro Styles PAK 7 you can expect 25 rock & pop, 25 jazz, and 25 country styles, as well as 25 of this year's wildcard genre: Celtic!
Here's a small sampling of what XPro Styles PAK 7 has to offer: energetic rock jigs, New Orleans funk, lilting jazz waltzes, fast Celtic punk, uptempo train beats, gritty grunge, intense jazz rock, groovy EDM, soulful R&B, soft singer-songwriter pop, country blues rock, and many more!
Special Pricing! Until September 30, 2024, all the XPro Styles PAKs 1 - 7 are on sale for only $29 ea (Reg. $49 ea)! Supercharge your Band-in-a-Box 2024® with XPro Styles PAK 7! Order now!
Learn more and listen to demos of XPro Styles PAKs.
Watch the XPro Styles PAK 7 Overview & Styles Demos video.
XPro Styles PAKs require Band-in-a-Box® 2024 or higher and are compatible with ANY package, including the Pro, MegaPAK, UltraPAK, UltraPAK+, and Audiophile Edition.
New! Xtra Styles PAK 18 for Band-in-a-Box 2024 for Mac!
Xtra Styles PAK 18 for Band-in-a-Box version 2024 is here with 200 brand new styles to take for a spin!
Along with 50 new styles each for the rock & pop, jazz, and country genres, we’ve put together a collection of styles using sounds from the SynthMaster plugin!
In this PAK you'll find: dubby reggae grooves, rootsy Americana, LA jazz pop, driving pop rock, mellow electronica, modern jazz fusion, spacey country ballads, Motown shuffles, energetic EDM, and plenty of synth heavy grooves! Xtra Style PAK 18 features these styles and many, many more!
Special Pricing! Until September 30, 2024, all the Xtra Styles PAKs 1 - 18 are on sale for only $29 ea (Reg. $49 ea)! Expand your Band-in-a-Box 2024® library with Xtra Styles PAK 18! Order now!
Learn more and listen to demos of the Xtra Styles PAK 18 here.
Watch the Xtra Styles PAK 18 Overview & Styles Demos video.
Note: The Xtra Styles require the UltraPAK, UltraPAK+, or Audiophile Edition of Band-in-a-Box®. (Xtra Styles PAK 18 requires the 2024 UltraPAK/UltraPAK+/Audiophile Edition. They will not work with the Pro or MegaPAK version because they need the RealTracks from the UltraPAK, UltraPAK+, or Audiophile Edition.
New! Xtra Styles PAK 18 for Band-in-a-Box 2024 for Windows!
Xtra Styles PAK 18 for Band-in-a-Box version 2024 is here with 200 brand new styles to take for a spin!
Along with 50 new styles each for the rock & pop, jazz, and country genres, we’ve put together a collection of styles using sounds from the SynthMaster plugin!
In this PAK you'll find: dubby reggae grooves, rootsy Americana, LA jazz pop, driving pop rock, mellow electronica, modern jazz fusion, spacey country ballads, Motown shuffles, energetic EDM, and plenty of synth heavy grooves! Xtra Style PAK 18 features these styles and many, many more!
Special Pricing! Until September 30, 2024, all the Xtra Styles PAKs 1 - 18 are on sale for only $29 ea (Reg. $49 ea)! Expand your Band-in-a-Box 2024® library with Xtra Styles PAK 18! Order now!
Learn more and listen to demos of the Xtra Styles PAK 18 here.
Watch the Xtra Styles PAK 18 Overview & Styles Demos video.
Note: The Xtra Styles require the UltraPAK, UltraPAK+, or Audiophile Edition of Band-in-a-Box®. (Xtra Styles PAK 18 requires the 2024 UltraPAK/UltraPAK+/Audiophile Edition. They will not work with the Pro or MegaPAK version because they need the RealTracks from the UltraPAK, UltraPAK+, or Audiophile Edition.
New! XPro Styles PAK 7 for Band-in-a-Box 2024 for Windows!
We've just released XPro Styles PAK 7 with 100 brand new RealStyles, plus 50 RealTracks and RealDrums that are sure to delight!
With XPro Styles PAK 7 you can expect 25 rock & pop, 25 jazz, and 25 country styles, as well as 25 of this year's wildcard genre: Celtic!
Here's a small sampling of what XPro Styles PAK 7 has to offer: energetic rock jigs, New Orleans funk, lilting jazz waltzes, fast Celtic punk, uptempo train beats, gritty grunge, intense jazz rock, groovy EDM, soulful R&B, soft singer-songwriter pop, country blues rock, and many more!
Special Pricing! Until September 30, 2024, all the XPro Styles PAKs 1 - 7 are on sale for only $29 ea (Reg. $49 ea)! Supercharge your Band-in-a-Box 2024® with XPro Styles PAK 7! Order now!
Learn more and listen to demos of XPro Styles PAKs.
Watch the XPro Styles PAK 7 Overview & Styles Demos video.
XPro Styles PAKs require Band-in-a-Box® 2024 or higher and are compatible with ANY package, including the Pro, MegaPAK, UltraPAK, UltraPAK+, and Audiophile Edition.
Video - Band-in-a-Box® DAW Plugin Version 6 for Mac®: New Features for Reaper
Band-in-a-Box® 2024 for Mac® - Update Today!
Band-in-a-Box® 2024 for Mac® Video - Over 50 New Features and Enhancements!
|
|
|
|
|
|
|
|
|
|
|
Forums65
Topics82,790
Posts749,370
Members38,889
|
Most Online2,537 Jan 19th, 2020
|
|
|
|
|
|
|
|
|